Zoeller 651-0009 Sewage Pump, 5.0 HP, 230 V, 3 Ph, 15.2 Amps, Model F651

Description

Zoeller "Sewage-Waste" Sewage & Dewatering Pump
This submersible pump is designed for use in commercial dewatering and wastewater applications and can be used to transfer wastewater or unscreened raw sewage. The semi-open reversing impeller design reduces the risk of clogging and allows each pump to pass a 2-1/2" spherical solid. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
Corrosion resistant powder coated epoxy finish
Class 30 cast iron base, cap, motor and pump housing
Semi-open ductile iron impeller
All units are double seal for extra motor protection
Stainless steel screws, washers, tag and seal assembly
Single phase - capacitor start, capacitor run
Oil filled, hermetically sealed motor with heavy duty finned motor housing for added heat dissipation
Continuous duty operation in submerged conditions
416 stainless steel motor shaft
Stainless steel fitted tandem shaft seals, carbon/ceramic seal faces
Oversized upper and lower ball bearings running in an oil bath
Buna N square rings and seals used throughout
Includes a stainless steel handle for easy installation and removal
Passes 2 ½" spherical solids
4" NPT horizontal discharge
Maximum temperature for sewage or dewatering: 104° F
Double seal only
UL listed 25 foot 3-wire cord
Hermetically sealed to be watertight and dust-tight
100% computerized tested
For unusual conditions, a reserve safety factor is engineered into the design of every pump
Control Panel Options
Below are the control panels that can be used with this pump:
10-1084
10-1112
Note:
Image is illustrative and may not reflect details of actual product.
Specifications:
Brand: Zoeller
Mfg. Number: 651-0009
Model: F651
Series: Sewage Waste 600
Product Type: Sewage Pump
Application: Sewage Waste/Dewatering
Operation: Manual
Horsepower: 5.0 HP
Voltage: 230 Volts
Phase: 3
Frequency: 60 Hz
Speed: 1750 RPM
Seal Type: Double
Pump Housing Material: Cast iron
Impeller Material: Ductile iron
Impeller Type: Semi-open
Maximum Solids Handling: 2-1/2"
Discharge Connection: 4" horizontal
Maximum Flow: 525 GPM
Maximum Head: 54 ft
Cord Length: 25 ft
Maximum Fluid Temperature: 104°F