Zoeller 4294-0004 High Head Sewage Pump, 1-1/2 HP, 230 V, 1 Ph, Model E4294

Description

Zoellers E4294 High Head Waste-Mate Non-Automatic Cast Iron Sewage Pump
Designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater and effluent or raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 2" (50 mm) spherical solids. These durable cast iron pumps include a powder coated epoxy finish to prevent corrosion, and are designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
Durable cast iron constructed switch case, base, motor and pump housing
No sheet metal parts to rust or corrode
All cast iron class 25-30 25000# tensile strength
Stainless steel screws, bolts, float rod, handle, guard, arm and seal assembly
Oil-filled, hermetically sealed, automatic reset thermal overload protected (1 Ph only) motor
Bronze class 84-8-0-4, non-clogging vortex impeller
Maximum temperature for sewage or dewatering 130°F (54°C), 120°F (49°C) for WD295
If over 130°F (54°C), consult factory
Shaft seal - stainless steel carbon & ceramic rotary
Corrosion resistant powder coated epoxy finish
Upper sleeve bearing and lower ball bearing running in bath of oil
Neoprene square ring & gasket
All models pass 2" spherical solids
Automatic units available with float operated, submersible (NEMA 6)2-pole mechanical switch
On point: 14-3/4"
Off point: 5"
2" NPT female flanged vertical discharge (3" Optional)
100% computerized tested
Reserve powered design. For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump.
Double Seal Features
Gives motor extra protection from seal leaks
Improved bearing lubrication
Helps eliminate seal and bearing damage from dry runs
Applications
Residential or light commercial dewatering and wastewater.
Specifications:
Brand: Zoeller
Mfg. Number: 4294-0004
Model: E4294
Series: Waste-Mate 290
Product Type: Sewage pump
Application: Sewage/Dewatering pump
Operation: Manual
Horsepower: 1.5 HP
Voltage: 230 Volts
Phase: 1
Frequency: 60 Hz
Speed: 3450 RPM
Seal Type: Double
Pump Housing Material: Cast iron
Impeller Material: Cast iron
Impeller Type: Non-clogging vortex
Maximum Solids Handling: 2"
Discharge Connection: 2" NPT flanged vertical
Maximum Flow: 195 GPM
Maximum Head: 62 ft
Cord Length: 20 ft
Maximum Fluid Temperature: 130°F