Zoeller 405-0004 Model E405, Waste-Mate 400 Series, Sewage Pump, 3 HP, 230V, 1Ph

Description

Zoeller "Waste-Mate" Sewage & Dewatering Pump
This submersible pump is designed for use in residential or commercial dewatering and wastewater applications and can be used to transfer large volumes of water from parking lots, flooded areas and unscreened raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass 3" spherical solids. Constructed of non-corrodible hardware, these durable cast iron pumps include a powder coated epoxy finish to prevent corrosion. Every pump is designed to provide heat dissipation from the motor for longer life and lower life cycle cost. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features:
Corrosion-resistant, powder-coated epoxy finish
Cast iron base, cap, motor and pump housing
Oil filled, hermetically sealed, automatic reset thermal overload protected motor
Non clogging cast iron vortex impeller
Upper sleeve bearing and lower ball bearing running in bath of oil
Mechanical shaft seal - carbon and ceramic rotary face seal, with stainless steel wetted parts
Stainless steel screws, bolts, washers and lifting bracket
Stainless steel handle for easy installation and removal
Neoprene square ring & gasket
4" horizontal ANSI flanged discharge
Passes 3" spherical solids
Maximum temperature: 130° F
20 ft UL listed, 3-wire neoprene cord and plug
Hermetically sealed to be watertight and dust-tight
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Control Panel Options
Below are the control panels that can be used with this pump:
10-0125
10-1038
10-0092
10-0093
10-1045
Note:
Image is illustrative and may not reflect details of actual product.
Specifications:
Brand: Zoeller
Mfg. Number: 405-0004
Model: E405
Series: Waste-Mate 400
Product Type: Sewage pump
Application: Sewage/Dewatering pump
Operation: Manual
Horsepower: 3 HP
Voltage: 230 Volts
Phase: 1
Frequency: 60 Hz
Speed: 1725 RPM
Seal Type: Single
Pump Housing Material: Cast iron
Impeller Material: Cast iron
Impeller Type: Non-clogging vortex
Maximum Solids Handling: 3"
Discharge Connection: 4" flange horizontal
Maximum Flow: 355 GPM
Maximum Head: 38 ft
Cord Length: 20 ft
Maximum Fluid Temperature: 130°F