Zoeller 282-0035, Model BE282, Sewage Pump with Float Switch, 1/2 HP, 230V, 1 Ph

Description

Zoeller Model BE282 Submersible Pump
The "Waste-Mate" series of submersible pumps is designed for use in residential or light commercial dewatering and wastewater applications and can be used to transfer groundwater and effluent or unscreened raw sewage. The innovative vortex impeller design reduces the risk of clogging and allows each pump to pass a 2" spherical solid. This durable cast iron pump includes a powder coated epoxy finish to prevent corrosion, and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
Corrosion resistant powder coated epoxy finish
Durable cast iron constructed base, switch case, motor and pump housing
Cast iron non-clogging vortex impeller
Shaft seal - Carbon and ceramic rotary face seal, with stainless steel wetted parts
Upper sleeve bearing and lower ball bearing running in bath of oil
Oil-filled, hermetically sealed, automatic reset thermal overload protected motor
Float operated, submersible (NEMA 6) mechanical switch
No sheet metal parts to rust or corrode
Stainless steel screws, bolts, float rod, handle, guard and arm and seal assembly
Maximum temperature for sewage or dewatering 130° F
2" flanged vertical discharge
All models pass 2" spherical solids
10 ft, UL listed, 3-wire neoprene cord and plug
On point: 15-1/4"
Off point: 5-1/4"
For unusual conditions a reserve safety factor is engineered into the design of every Zoeller pump
Note:
Image is illustrative and may not reflect details of actual product.
Specifications:
Brand: Zoeller
Mfg. Number: 282-0035
Model: BE282
Series: Waste-Mate 280
Product Type: Sewage Pump
Application: Sewage/Dewatering
Operation: Automatic
Horsepower: 1/2 HP
Voltage: 230 Volts
Phase: 1
Frequency: 60 Hz
Speed: 1750 RPM
Seal Type: Single
Pump Housing Material: Cast iron
Impeller Material: Cast iron
Impeller Type: Non-clogging vortex
Maximum Solids Handling: 2"
Discharge Connection: 2" flanged vertical
Maximum Flow: 125 GPM
Maximum Head: 25 ft
Cord Length: 10 ft
Maximum Fluid Temperature: 130°F