Zoeller 140-0005, Model BN140, Flow-Mate Sump Pump, 1 HP, 115 Volts, 1 Phase

Description

Zoeller BN140 Effluent Pump
This submersible pump is designed for use in residential or light commercial dewatering applications and can be used to transfer groundwater or effluent as well as being ideal for use in septic systems, low pressure pipe (LPP), and enhanced flow STEP system applications.. It includes a powder coated epoxy finish to prevent corrosion and is designed to provide great heat dissipation from the motor, ensuring a long service life. As with every Zoeller pump, each one is 100% pressure-tested, submerged and run to ensure quality and reliability for years of trouble-free performance.
Features
Corrosion-resistant, powder coated epoxy finish
Durable cast iron cap, motor housing, pump housing, and base
Non-clogging, engineered thermoplastic vortex impeller design
Oil filled and hermetically sealed, automatic reset thermal overload protection
Available in both single and double shaft seal designs
Carbon/ceramic mechanical shaft seals
Stainless steel bolts and lifting handle
Upper sleeve and lower ball bearing running in bath of oil
Includes a variable level float switch and 1-1/2" x 2" PVC adapter fitting
1-1/2" NPT vertical discharge
Passes 1/2" spherical solids
Operates at 130° F in effluent or dewatering applications
20 ft UL listed, neoprene cord with molded plug cap and ground wire
Note:
Image is illustrative and may not reflect details of actual product.
Specifications:
Brand: Zoeller
Mfg. Number: 140-0005
Model Number: BN140
Series: 140 Flow-Mate
Product Type: Submersible pump
Application: Effluent or dewatering
Operation: Automatic
Horsepower: 1 HP
Voltage: 115 Volts
Phase: 1
Frequency: 60 Hz
Speed: 3450 rpm
Seal: Single
Motor Type: Permanent split capacitor
Insulation: Class B
Current: 12 Amps
Discharge Size: 1-1/2" NPT
Solid Handling: 2" spherical solids
Cord Length: 20 ft
Flow at 5 ft: 86 gpm
Flow at 10 ft: 80 gpm
Flow at 15 ft: 73 gpm
Flow at 20 ft: 66 gpm
Flow at 25 ft: 59 gpm
Flow at 30 ft: 49 gpm
Flow at 40 ft: 28 gpm
Shut-off Head: 50 ft
Maximum Flow: 86 gpm
Maximum Temperature: 130°F
Cooling: Oil filled
Motor Protection: Auto reset thermal overload
Cap Material: Cast iron
Motor Housing: Cast iron
Pump Housing: Cast iron
Base: Cast iron
Upper Bearing: Sleeve bearing
Lower Bearing: Ball bearing
Mechanical Seals: Carbon and ceramic
Impeller Type: Non-clogging vortex
Impeller Material: Engineered thermoplastic
Hardware: Stainless steel
Motor Shaft: JIS S45C steel
Gasket: Neoprene
Notes: Single piggyback switch included
Warranty: 1 year