Sump/Effluent Pump, HP 1/2, 115V AC, Continuous

Description

Sump/Effluent Pump, HP 1/2, 115V AC, Continuous, Intermittent Duty Cycle, Max. Head 37.0 ft
Technical Specs
Item
Sump/Effluent Pump
HP
1/2
Rated Voltage
115V AC
Hz
60 Hz
Phase - Pumps
1
Amps
8
Body Material
Cast Iron
Impeller Material
Engineered Polymer
Shaft Seal Material - Pumps
Carbon, Ceramic
Switch Actuation
Vertical Float
Switch Electrical Connection
Integral
Off Point
4 in
On Point
9 1/2 in
Flow Rate @ 10 Ft. of Head
56.0 gpm
Flow Rate @ 15 Ft. of Head
49.0 gpm
Flow Rate @ 20 Ft. of Head
42.0 gpm
Flow Rate @ 40 Ft. of Head
0.0 gpm
Flow Rate @ 60 Ft. of Head
0.0 gpm
Flow Rate @ 80 Ft. of Head
0.0 gpm
Flow Rate @ 100 Ft. of Head
0.0 gpm
Flow Rate @ 150 Ft. of Head
0.0 gpm
Max. Head
37.0 ft
Min. Sump Pit Dia.
10 in
Minimum Water Depth
4 in
Body Dia.
6 3/8 in
Width at Widest Point
10 in
Overall Height
13 in
Cord Length
25 ft
Discharge
1-1/2 in NPT
Max. Diameter Solids
3/4 in
Max. Liquid Temp.
140 Degrees F
Duty Cycle
Continuous, Intermittent
RPM
3,450 RPM
Thermal Protection
Yes
Agency Compliance
CSA, SSPMA
Manufacturers Warranty Length
3 yr
Nominal Voltage
120V AC
View Less
These 110V submersible sump pumps have a cast-iron body that helps dissipate heat as the pump drains water from sump pits. Pumps have a painted or powder-coated finish to protect the body from corrosion