Submersible Sump Pump 3.5 Amp 1/3 hp Self-Priming Thermal Overload Protection

Description

Pre-assembled primary and backup for quick and easy installation
24-hour-a-day monitoring of pump, power and battery conditions
2 sets of dual float switches ensure pump turns on when needed
Easy to install with little or no plumbing knowledge required! This pre-assembled Basement Watchdog Combination Sump Pump System provides both primary and battery backup pumping capabilities, offering complete protection and peace of mind. Pumping up to 3,720 GPH, the ? HP Cast Iron primary sump pump is both powerful and energy efficient, using only 3.5 amps. This system includes the Basement Watchdog Emergency Battery Backup Sump pump system that provides 24 hour a day monitoring of pump, power, and battery conditions. It will protect your basement from a power outage, primary pump or float failure, and provide extra pumping capacity when needed. The user-friendly controller will sound an alarm, give a visual light, and pinpoint the problem. The battery backup sump pump can run intermittently for days on a single battery charge from any Basement Watchdog Standby Battery. With the Combination sump pump system in your pit, you can feel safe that the Basement Watchdog is WATCHING OUT FOR YOU!
Pump Switch Type: Vertical
Voltage: 115v
Battery Type Required: 12-volt
Vertical Lift (ft.): 22
Outlet Diameter Connection (in.): 1-1/2 FPT
Features: Battery Back-Up,Bottom/End Suction,Corrosion Resistant,Self-Priming,Submersible,Thermal Overload Protection
Included: Control Box,Hardware,Pump Hookup
Discharge Flow @ 10 ft. (gallons/hour): 3100
Housing Material: Cast-Iron
Pack Size: 1
Discharge Flow @ 0 ft. (gallons/min): 62
Minimum Sump Basin Diameter: 11 to 14
Amperage (amps): 3.5 A
Discharge Flow @ 15 ft. (gallons/min): 30
Maximum Working Temperature (F): 104
Cord Length (ft.): 10
Maximum Horsepower (hp): 1/3
Discharge Flow @ 10 ft. (gallons/min): 52
Battery Life (hours): 50 h
Maximum Pressure (psi): 0
Number of Batteries Required: 1
Impeller Material: Engineered Polymer (Primary); Non Corrosive ABS (Backup)
Product Weight (lb.): 25.5 lb
Power Type Required: AC
Minimum working temperature (F): 40
Discharge Flow @ 0 ft. (gallons/hour): 3720
Certifications and Listings: CSA Listed,cULus Listed
Product Height (in.): 17.75 in
Product Depth (in.): 8.75 in
Switch-On Height (in.): 5.5" (primary pump). The primary pump will continue to the pump for 10 seconds after the float drops
Switch-Off Height (in.): 5.5" (primary pump). The primary pump will continue to the pump for 10 seconds after the float drops
Product Width (in.): 10.75 in
]]>