-40%
Myers WHR15H-03 High Head Sewage Pump 1.5 HP 200V 3 PH 20' Cord NEW OLD STOCK

Myers WHR15H-03 High Head Sewage Pump 1.5 HP 200V 3 PH 20' Cord NEW OLD STOCK

$ 488.4

Availability: 100 in stock
  • Supply Voltage: 200 V
  • Brand: MYERS
  • Return shipping will be paid by: Buyer
  • Number of Phases: 3 Phase
  • Discharge Diameter: 2 in
  • Item must be returned within: 30 Days
  • MPN: Does Not Apply
  • Condition: NEW OLD STOCK NEVER USED NO WARRANTY 11/17 DATE
  • Housing Material: Cast Iron
  • Rated Power: 1 1/2 hp
  • Features: Submersible
  • Maximum Flow Rate: 181 GPM
  • Refund will be given as: Money back or replacement (buyer's choice)
  • All returns accepted: Returns Accepted

    Description

    Myers WHRH Series High Head Sewage Pump Description  NEW OLD STOCK NEVER USED  NO WARRANTY  11/17 DATE
    The WHR5H - WHR20H Series Pumps are designed for use in Light Commercial & Residential Raw Sewage and Effluent Applications. They deliver higher heads than standard sewage pumps and will pass 2" solids. Recessed vortex impeller provides an unobstructed passage in the volute case, allowing the pump to handle stringy trash without plugging the impeller.
    Myers WHRH Series High Head Sewage Pump Typical Applications
    Residential and Commercial Sewage
    High Capacity Sump
    Effluent
    Domestic Wastewater
    Septic Pumping Applications
    Myers WHRH Series High Head Sewage Pump Features
    Tough Against Corrosion
    All Cast Iron Construction Resists the Most Extreme Corrosive Environments.
    Runs Cooler
    Oil-Filled Motor for Bearing Lubrication and Maximum Heat Dissipation.
    Flow to Meet Demand
    Higher Head Performance for Demanding Sewage and Effluent Applications.
    Powerful Starts
    High-Torque, Permanent Split Capacitor (PSC) Motor; No Starting Switches or Relays to Wear Out.
    Thermal Protection
    Heat Sensor Overload Protection with Automatic Reset when Motor Cools to a Safe Operating Temperature.
    Myers WHR15H-03 Series High Head Sewage Pump Specifications
    VOLTAGE: 3ø, 200V, 60Hz
    HORSEPOWER: 1.5 HP
    AMP DRAW (full load): 8.5
    MOTOR TYPE: Permanent Split Capacitor (PSC)
    RPM: 3450
    MAXIMUM HEAD: up to 60'
    MAXIMUM CAPACITY: up to 181 GPM
    SWITCH TYPE: Manual
    MINIMUM SUMP DIAMETER: Simplex: 24” Duplex: 36”
    DISCHARGE PIPE SIZE: 2.0" NPT (3.0" optional)
    MAXIMUM SOLIDS HANDLING SIZE: 2.0"
    IMPELLER TYPE: Ductile Iron, Recessed
    IMPELLER DIAMETER: 4.13"
    CORD LENGTH: 20'
    CORD SIZE: 16/4; Type: SJOW/SJOW-A
    BODY CONSTRUCTION: Cast Iron
    MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)