Myers WHR10H-03 High Head Sewage Pump 1 HP 200V 3 PH 20' Cord NEW OLD STOCK

Description

Myers WHRH Series High Head Sewage Pump   NEW OLD STOCK NEVER USED   DATE 08/16   NO WARRANTY
The WHR5H - WHR20H Series Pumps are designed for use in Light Commercial & Residental Raw Sewage and Effluent Applications. They deliver higher heads than standard sewage pumps and will pass 2" solids. Recessed vortex impeller provides an unobstructed passage in the volute case, allowing the pump to handle stringy trash without plugging the impeller.
Myers WHRH Series High Head Sewage Pump Typical Applications
Residential and Commercial Sewage
High Capacity Sump
Effluent
Domestic Wastewater
Septic Pumping Applications
Myers WHRH Series High Head Sewage Pump Features
Tough Against Corrosion
All Cast Iron Construction Resists the Most Extreme Corrosive Environments.
Runs Cooler
Oil-Filled Motor for Bearing Lubrication and Maximum Heat Dissipation.
Flow to Meet Demand
Higher Head Performance for Demanding Sewage and Effluent Applications.
Powerful Starts
High-Torque, Permanent Split Capacitor (PSC) Motor; No Starting Switches or Relays to Wear Out.
Thermal Protection
Heat Sensor Overload Protection with Automatic Reset when Motor Cools to a Safe Operating Temperature.
Myers WHR10H-03 Series High Head Sewage Specifications
VOLTAGE: 3ø, 200V, 60Hz
HORSEPOWER: 1.0 HP
AMP DRAW (full load): 7.7
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 3450
MAXIMUM HEAD: up to 45'
MAXIMUM CAPACITY: up to 141 GPM
SWITCH TYPE: Manual
MINIMUM SUMP DIAMETER: Simplex: 24” Duplex: 36”
DISCHARGE PIPE SIZE: 2.0" NPT (3.0" optional)
MAXIMUM SOLIDS HANDLING SIZE: 2.0"
IMPELLER TYPE: Ductile Iron, Recessed
IMPELLER DIAMETER: 3.88"
CORD LENGTH: 20'
CORD SIZE: 16/4; Type: SJOW/SJOW-A
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)
NEW OLD STOCK NEVER USED   DATE 08/16   NO WARRANTY