Myers ME50S-21 Effluent Pump 0.5 HP 230V 1 PH 20' Cord Manual NEW OLD STOCK

Description

Myers ME Series Effluent Pump Description
The Myers ME Series Effluent Pumps are designed specifically for effluent pressure distribution mounds, trenches and high-flow drainage applications. Heavy-duty construction with finest corrosion-resistant materials for years of extended service in the harshest environments. Available in single- and double-seal models; thermoplasic and bronze impeller models.
Myers ME Series Effluent Pump Typical Applications
Effluent Removal
Trench and Mound Pressure Dose Systems
Sump Drainage
Water Transfer
Flood Control
Myers ME Series Effluent Pump Features
High-Efficiency, Two-Vane, Enclosed Impeller Provides Ideal Perormance for Efficient Dosing Impeller Passes Full 3/4" Solids
Enclosed Impeller Design Eliminates the Possibility of Jamming or Corrosion Between Impeller and Volute
Oil-Filled Motor for Maximum Heat Dissipation and Constant Bearing Lubrication
High-Torque, Permanent Split Capacitor (PSC), Single-Phase Motors; No Starting Switches or Relays to Wear Out
Optional Seal Leak Probe Warns of Seal Leak Condition (dual seal motors only); Helps Prevent Costly Motor Damage
Motors Have a Winding Current and Temperature-Sensitive Overload( Single Phase Only)
Volute Seal Ring is Replaceable; Restores Pump to Original Performance if Wear Should Occur
Motor is Held in Place by 4 Screws; Easily Removed if Service is Ever Needed
Myers ME50S-21 Effluent Pump Specifications
VOLTAGE: 1ø, 230V, 60 Hz
HORSEPOWER: 0.5 HP
AMP DRAW (full load): 6.0
MOTOR TYPE: Permanent Split Capacitor (PSC)
RPM: 3450
MAXIMUM HEAD: 53'
MAXIMUM CAPACITY: 90 GPM
SWITCH TYPE: Manual
MINIMUM SUMP DIAMETER: Simplex 24" Duplex: 36"
DISCHARGE PIPE SIZE: 2.0" NPT
MAXIMUM SOLIDS HANDLING: 3/4"
IMPELLER TYPE: Thermoplastic, Enclosed Two Vane
CORD LENGTH: 20'
BODY CONSTRUCTION: Cast Iron
MAXIMUM LIQUID TEMPERATURE: 140°F (60°C)