Manual Sewage Pump, 10' cord, 4/10 HP, 115V

Description

Overview:
The Liberty Pump LE41M
is a manual submersible sewage pump with a 4/10, 115V motor and a 10' quick-disconnect power cord. This Liberty sewage pump is intended to be run using an approved liquid level control or approved motor control with correct rating that matches motor input in full load amperes. Do not let the Liberty Pump LE41M manual submersible pump run dry. When the Liberty sewage pump shuts off, at least 6" of fluid have to be left in the basin so the impeller remains submerged.
The Liberty Pump LE41M has a shut-off head of 19' and a discharge of 2" FNPT. It can handle solids up to 2" and temperatures up 140F. The Liberty sewage pump motor is oil filled and thermally protected. The rotor shaft is made of 416-stainless steel and is supported by lower and upper ball bearings.
Features:
Heavy cast iron construction
Oil filled, thermally protected motor
Permanently lubricated ball bearings
Corrosion resistant, vortex style impeller made of high temperature engineering polymer
All stainless steel fasteners and rotor shaft
Quick-disconnect 10' standard power cord allows replacement of cord in seconds without breaking seals to motor
Technical Specifications:
Horsepower: 4/10HP
Cord length: 10'
Discharge: 2" FNPT
Solids Handling: up to 2"
Shut-off Head: 19'
Voltage: 115V
Amps: 12
Hertz: 60 Hz
Phase: 1
Maximum fluid temperature: 140°F
Height: 14"
Width: 10.75"
Weight: 40 lbs.
Minimum basin diameter: 18"
Minimum basin depth: 24"