DAYTON - 4HU73 Effluent Pump HP 1/2 120V AC

Description

I am selling a DAYTON - 4HU73 Effluent Pump HP 1/2 120V AC .  This is listed as new/other, because it comes from an open box. This item has never been used or tested. What you see in the picture is exactly what will arrive at your door!
Thank-you for looking and your satisfaction is guaranteed. If you have any questions or concerns, please don’t hesitate to contact us!
Specs:
Item
Effluent Pump
HP
1/2
Rated Voltage
120V AC
Hz
60 Hz
Phase - Pumps
1
Amps
9.4
Body Material
Cast Iron
Impeller Material
Cast Iron
Shaft Seal Material - Pumps
Carbon, Ceramic
Switch Actuation
Tether Float
Switch Electrical Connection
Piggyback
Off Point
4 1/4 in
On Point
13 1/4 in
Flow Rate @ 10 Ft. of Head
78.0 gpm
Flow Rate @ 15 Ft. of Head
65.0 gpm
Flow Rate @ 20 Ft. of Head
52.0 gpm
Max. Head
31.0 ft
Min. Sump Pit Dia.
18 in
Minimum Water Depth
18 in
Body Dia.
9 1/8 in
Width at Widest Point
8 1/2 in
Overall Height
13 in
Cord Length
20 ft
Discharge
1-1/2 in
Max. Diameter Solids
3/4 in
Max. Liquid Temp.
104 Degrees F
Duty Cycle
Intermittent
Alarm Included
No
RPM
3,450 RPM
Gauge/Conductor
18/3
Nominal Voltage
110V AC