DAYTON 4HU73 Effluent Pump 1/2 HP Tether Float 31 ft Max Head 3/4" Max Dia Solid

Description

I am offering a new
DAYTON 4HU73 Effluent Pump: 1/2 HP, Tether Float, 31 ft Max. Head, 3/4 in Max. Dia Solids, 110V AC.
This is listed as New(other) because there are some scuffs/cracks on the pump (see photo), and the original box was damaged.
Otherwise, it is new and in excellent condition.
Specs:
Item
Effluent Pump
HP
1/2
Rated Voltage
120V AC
Hz
60 Hz
Phase - Pumps
1
Amps
9.4
Body Material
Cast Iron
Impeller Material
Cast Iron
Shaft Seal Material - Pumps
Carbon, Ceramic
Switch Actuation
Tether Float
Switch Electrical Connection
Piggyback
Off Point
4 1/4 in
On Point
13 1/4 in
Flow Rate @ 10 Ft. of Head
78.0 gpm
Flow Rate @ 15 Ft. of Head
65.0 gpm
Flow Rate @ 20 Ft. of Head
52.0 gpm
Max. Head
31.0 ft
Min. Sump Pit Dia.
18 in
Minimum Water Depth
18 in
Body Dia.
9 1/8 in
Width at Widest Point
8 1/2 in
Overall Height
13 in
Cord Length
20 ft
Discharge
1-1/2 in
Max. Diameter Solids
3/4 in
Max. Liquid Temp.
104 Degrees F
Duty Cycle
Intermittent
Alarm Included
No
RPM
3,450 RPM
Gauge/Conductor
18/3
Nominal Voltage
110V AC
WARNING Cancer and Reproductive Harm - www.P65Warnings.ca.gov
Thanks for looking, your satisfaction is guaranteed.
Location: 6-A-2 (inner)