-40%
Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2
Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2
Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2
Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2
Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2
Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2

Barnes Pumps SE421 Submersible Sewage Ejector Pump, 2" Discharge, 4/10 HP, 230 V

$ 179.52

Availability: 84 in stock
  • Refund will be given as: Money Back
  • Condition: Does not have original box. Appears to be new and unused.
  • Item must be returned within: 30 Days
  • Number of Phases: 1 Phase
  • Rated Power: 4/10 hp
  • Discharge Diameter: 2 in
  • Supply Voltage: 230 V
  • Maximum Flow Rate: 130gpm
  • Features: Submersible
  • Country/Region of Manufacture: United States
  • Housing Material: Cast Iron
  • Restocking Fee: No
  • Custom Bundle: No
  • Brand: Barnes
  • MPN: 096750
  • Modified Item: No
  • All returns accepted: Returns Accepted
  • Return shipping will be paid by: Buyer

    Description

    This is a powerful sewage / effluent pump that came to me without a box. I have included shipping to get it to you at a decent rate. If you have any questions, feel free to reach out.
    Here are the details from the spec sheet:
    DISCHARGE  .......................2” NPT, Female, Vertical
    LIQUID TEMPERATURE
    SE411   ...........77°F (25°C) Continuous
    SE421   ...........104°F (40°C) Continuous
    VOLUTE ...............................Cast Iron ASTM A-48, Class 30
    MOTOR HOUSING ..............Cast Iron ASTM A-48, Class 30
    SEAL PLATE  ......................Cast Iron ASTM A-48, Class 30
    IMPELLER:
    Design .............2 Vane, Open with pump out vanes on back
    side, Dynamically Balanced, ISO G6.3
    Material  ..........Cast Iron ASTM A-48, Class 30
    SHAFT   ................................416 Stainless  Steel
    SQUARE RINGS  .................Buna-N
    HARDWARE ........................300 Series Stainless Steel
    PAINT ...................................Air Dry Enamel
    SEAL:  Design  ............Single Mechanical, Oil Filled Reservoir,
    Secondary Exclusion Seal
    Material ...........Carbon/Ceramic/Buna-N
    Hardware - 300 Series Stainless
    CORD ENTRY ......................15 ft. (5m) Quick Disconnect Cord with plug
    On 115Volt, Pressure Gromment for sealing
    and strain relief
    SPEED .................................1750 RPM (Nominal)
    UPPER BEARING ................Single Row, Ball, Oil Lubricated
    Load ................Radial
    LOWER BEARING ...............Single Row, Ball, Oil Lubricated
    Load ................Radial & Thrust
    MOTOR:  Design  ............NEMA L Torque Curve, Oil Filled, Squirrel
    Cage Induction
    Insulation  ........Class B
    SINGLE PHASE ...................Permanent Split Capacitor (PSC)
    Includes Overload Protection in Motor
    LEVEL CONTROL ..............."A" - Wide Angle, PVC, Mechanical, 15 ft (5m)
    cord with Piggy-Back Plug, N/O
    "VF" - Vertical Float, PVC, Snap Action,
    15 ft (5m) cord, with Piggy-Back plug.
    OFF point ONLY is adjustable
    OPTIONAL EQUIPMENT .....Seal Material, Additional Cord