-40%
4LE11 1/2 HP Submersible Effluent Pump 230V 2

4LE11 1/2 HP Submersible Effluent Pump 230V 2" NPT Discharge Cast Iron

$ 250.78

Availability: 74 in stock
  • GPM of Water @ 15 Ft. of Head: 84
  • Top Material: Cast Iron
  • Brand: DAYTON
  • Switch Type: None
  • Condition: Open box. Packaging in distressed condition, pump unaffected.
  • GPM of Water @ 25 Ft. of Head: 65
  • Bearing Type: Ball
  • Item: Submersible Effluent Pump
  • MPN: 4LE11
  • GPM of Water @ 10 Ft. of Head: 92
  • Shaft Seal: Silicon Carbide
  • Cord Length: 20"
  • HP: 1/2
  • Motor RPM: 3450
  • Phase: 1
  • GPM of Water @ 5 Ft. of Head: 96
  • Base Material: Cast Iron
  • Height: 17-5/16"
  • Impeller Material: Polypropylene
  • Housing Material: Cast Iron
  • GPM of Water @ 30 Ft. of Head: 53
  • Motor Type: Oil Filled PSC
  • GPM of Water @ 40 Ft. of Head: 20
  • GPM of Water @ 20 Ft. of Head: 76
  • Duty: Intermittent

    Description

    Submersible Effluent Pump
    SPECS
    Dayton submersible ejectors are self-contained and recommended for use in a sump or basin, where they should be vented in accordance with local plumbing codes. They are designed to pump effluent or wastewater, nonexplosive and noncorrosive liquids, and shall not be installed in locations classified as hazardous in accordance with the United Stated Electrical Code (NEC), ANSI/NFPA 70. Never install the pump in a trench, ditch, or hole with a dirt bottom; the legs will sink into the dirt and suction will become plugged.